How do I measure for a shower enclosure

To measure for a shower enclosure, you will need a tape measure and the following steps:

Determine the Type of Enclosure: Decide whether you want a framed, frameless, sliding, pivot, corner, or walk-in enclosure. The type of enclosure will affect how you measure.

Measure the Shower Base or Bathtub: If you have a shower base or bathtub, measure its width, depth, and height. Measure from wall to wall for width and depth, and from the base to the top edge for height. Note down these measurements.

Measure the Opening: If you're installing a door or glass panels, measure the width and height of the opening where the enclosure will be installed. Measure from wall to wall or from any existing side panels. For width, measure at the top, middle, and bottom to account for any irregularities. Note down these measurements.

Consider Clearance: Take into account any clearance requirements for the type of enclosure you have chosen. Some enclosures may need additional space for door swings or hardware. Refer to the manufacturer's guidelines or consult with a professional if you're unsure.

Check for Plumb Walls: Use a level to check if the walls are plumb (vertically straight). If the walls are not plumb, measure the width at the top and bottom of the opening to ensure accurate measurements.

Note Obstacles: Identify any obstacles such as faucets, showerheads, handles, or other fixtures that may affect the installation or positioning of the enclosure. Consider their location and make sure there is enough space to accommodate them within the enclosure.

Consult Manufacturer Guidelines: Different manufacturers may have specific measurement requirements for their shower enclosures. Check their guidelines or installation instructions to ensure you have the correct measurements.

It's generally recommended to have a professional installer or contractor take the measurements for you to ensure accuracy and proper fit. They have experience and expertise in dealing with different types of shower enclosures and can provide guidance based on your specific requirements.